SE Electronics USB 2200A Condenser Microphone
or make 4 interest-free payments of $132.50 AUD fortnightly with More info
Based on the studio standard sE2200a, the USB2200a records via USB directly to your DAW and has several features unique from competitor USB mics including, zero latency headphone monitoring, mix control playback/record path, 10dB pad, bass cut and simultaneous analogue/USB feeds. The USB2200a also has a proprietary chip and software set which deals with capsule noise when transforming the 5v power supplied via the USB cable to power the capsule, by first removing noise and spikes from the current. This noise would normally be amplified, which is why other USB mics are too noisy to use in a professional environment. No other USB mic on the market offers this kind of specification, and it makes a huge difference to the performance for studio use. The chip also delivers true plug in and play capability, automatically configuring the mic to the host as it is connected.
Frequency Response: 20Hz-20KHz •Sensitivity: 14.1mV/Pa -37 ± 1.5dB •Polar Pattern: Cardioid •Impedance: ≤ 200 Ohms •Equivalent Noise Level: 12dB(A weighted) •Max SPL for 0.5% THD@1000Hz: 130dB •Power Requirement: Phantom power 48V±4V •Connector: 3-pin Technical Specifications Acoustical operating principle: Pressure gradient transducer Maximum SPL for THD 0.5%2): 123 dB (cardioid) Directional pattern: Cardioid Maximum SPL for THD 0.5% with preattenuation2) : 133dB Frequency range: 20 Hz ... 20 kHz Maximum output voltage: 1500 mV Sensitivity at 1 kHz into 1 kohm: 55 mV/Pa1) Dynamic range of the microphone amplifier (A-weighted): 109dB Rated impedance: 50 ohms Supply voltage (P48, IEC 61938) : 48 V ± 4 V Rated load impedance: 1 kohms Current consumption (P48, IEC 61938): 4mA Equivalent noise level, CCIR1) : 27dB Matching connectors: XLR3F Equivalent noise level, A-weighted1): 14dB-A Weight: 565g Signal-to-noise ratio, CCIR1) (rel. 94 dB SPL): 69dB Diameter: 59mm Signal-to-noise ratio, A-weighted1) (rel. 94 dB SPL): 82dB Length: 163 mm